Avanti Beverage Dispenser WDTZ000 User Manual

0

Out of 0 Ratings

Owner's of the Avanti Beverage Dispenser WDTZ000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 44
 
USE AND CARE 5
ZeroWater
®
Filter Bottle
Use and Care Instructions
Please read before rst use.
INSTRUCTIONS BEFORE INSTALLING CARTRIDGE
AND FIRST USE
1. Clean all plastic components and lter cartridges by washing and rinsing
thoroughly with warm water only. Rinse the Filter Bottle thoroughly when
washing with soap.
2. Note: the Filter Bottle components, lter cartridges and TDS meter are not
dishwasher safe.
3. Discard all plastic bags. This may be a suffocation hazard to young children.
ASSEMBLY
1. Take the lower chamber and place the lower chamber
divider rim rmly on the top. The rippled part of the white
rim should be overlapping the lower chamber. If assembled
upside down, there will be leakage. Be sure it ts tightly
on the lower chamber (see ZeroWater
®
Filter Bottle
components
on page 4).
2. Align the nut (included) into the recessed area at the inner
bottom of the lower chamber and screw the oat valve
tightly through the hole on bottom of lower chamber (inset
A).
Do not prop the Filter Bottle on the oat valve once
assembled, as it is fragile and will break.
3. Place the lower chamber on top of your cooler with the oat
valve tting inside the cooler’s reservoir (see Using Your
ZeroWater
®
Filter Bottle with a Standard Water Cooler on
page 6).
4. Install lter cartridges now, using steps 1 through 3 from
instructions on next page.
5. Place the upper chamber on top of the lower chamber. Be
sure that the lower chamber divider ring is tightly afxed
around the lower chamber (see ZeroWater
®
Filter Bottle
components on page 4).
6. Place the lid on top of the upper chamber.
A

   Find Your Products By Category