5.0

Out of 1 Ratings

Owner's of the Avanti Dishwasher Avanti Products Dishwasher gave it a score of 5.0 out of 5. Here's how the scores stacked up:
  • Reliability

    5.0 out of 5
  • Durability

    5.0 out of 5
  • Maintenance

    5.0 out of 5
  • Performance

    5.0 out of 5
  • Ease of Use

    5.0 out of 5
of 28
 
15
used.
colorant.
Dishes are not dried
Rinse agent dispenser is
empty.
Make sure the rinse agent dispenser is filled.
Dishes and flatware not
clean.
Improper program.
Improper rack loading.
Select a stronger program.
Make sure that the action for the detergent
dispenser and spray arms are not blocked by large
dishware.
Cloudiness on glassware.
Combination of soft water
and too much detergent.
Use less detergent if you have soft water and
select a shorter cycle to wash the glassware to get
them clean.
Yellow or brown film on
inside surfaces.
Tea or coffee stains.
Iron deposits in water can
cause an overall film.
Using a solution of ½ cup bleach and 3 cups warm
water to remove the stains by hand.
Warning
You have to wait for 20 minutes after a cycle to let
the heating elements cool down before cleaning
interior: otherwise, burns will happen.
You have to call a water softener company for a
special filter.
White film on inside surface.
Hard water minerals
To clean the interior, use a damp sponge with
dishwasher detergent and wear rubber gloves.
Never use any other cleaner than dishwasher
detergent for the risk of foaming or suds.
Detergent left in dispenser
cups.
Dishes block detergent
cups.
Re-load the dishes properly.
Steam
Normal phenomenon
There is some steam coming through the vent by
the door latch during drying and water draining.
Black or gray marks on
dishes.
Aluminum utensils have
rubbed against dishes.
Use a mild abrasive cleaner to eliminate those
marks.
Water standing in the bottom
of the tub.
This is normal.
A small amount of clean water around the outlet on
the tub bottom at the back of the tub keeps the
water seal lubricated.
Water doesn’t pump out of
the tub.
Drain is clogged.
Make sure the kitchen sink is draining well. If the
dishwasher drains into a disposer, run it clear.
Dishwasher leaks.
Overfill dispenser or rinse
aid spills.
Dishwasher isn’t level.
Be careful not to overfill the rinse aid dispenser.
Spilled rinse aid could cause oversudsing and lead
to overflowing. Wipe away any spills with a damp
cloth.
Make sure the dishwasher is level.
LIGHT and QUICK program
lights flicker intermittently
Water has not reached the
required temperature (HOT)
Malfunction of the temperature sensor and or the
heating element
NORMAL and LIGHT
program lights flicker
intermittently
Failure of the temperature
sensor
Temperature sensor has failed.
Contact an authorized service center
NORMAL and QUICK
program lights flicker
intermittently
Failure of the temperature
sensor
Temperature sensor has failed.
Contact an authorized service center