Avanti Freezer Avanti Products Freezer User Manual

0

Out of 0 Ratings

Owner's of the Avanti Freezer Avanti Products Freezer gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 24
 
8
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock,
or injury when using your freezer, follow
these basic precautions:
• Read all instructions before using the freezer.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
freezer are still dangerous, even if they will “just sit in the garage a few days.”
• Before you throw away your old freezer: Take off the doors. Leave the shelves in
place so that children may not easily climb inside.
• Never allow children to operate, play with, or crawl inside the freezer.
• Never clean freezer parts with flammable fluids. The fumes can create a fire hazard
or explosion.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other freezer. The fumes can create a fire hazard or explosion.
-Save these instructions-
Free Standing Units
To ensure not only the efficient operation of your unit but also your safety.
When installing your unit follow the steps as shown below:
• Place your unit on a flat level surface that is strong enough to support the unit once it is fully
loaded.
• Your unit is equipped with adjustable height leveling legs to accommodate any minimal changes in
the level of the surface on which it is installed.
Countertop / Table Top Units
• When installing units that can be placed on countertops, keep the following in mind:
• Surface (countertop) is flat, level, and strong enough to support the unit once it is fully loaded.
• Surface is wide enough to accommodate the unit without any overhang.
• Surface is deep enough to accommodate the unit when the door is opened to 90º
INSTALLATION INSTRUCTIONS
Before Using Your Freezer
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
1 Storage Basket
1 Instruction Manual
1 Plastic Scraper
• Before connecting the freezer to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.

   Find Your Products By Category