4.0

Out of 1 Ratings

Owner's of the Clarity Amplified Phone E814CC gave it a score of 4.0 out of 5. Here's how the scores stacked up:
  • Reliability

    3.0 out of 5
  • Durability

    5.0 out of 5
  • Maintenance

    3.0 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    5.0 out of 5
of 64
 
58
I cannot dial out
• First try all the suggestions in listed under the “I cannot get a dial tone”.
• Make sure you have a dial tone before dialing. The cordless handset may take a second
or two to nd the telephone base and produce a dial tone. This is normal. Wait an
extra second before dialing.
• Check that all the telephones connected to the same telephone line are “hung-up”.
• Make sure to set the dial mode to the correct setting (pulse dialing or tone dialing) for
the service in your area.
• Eliminate any background noise. Noise from a television, radio or other appliances may
cause the telephone to not dial out properly. If you cannot eliminate the background
noise, rst try muting the cordless handset before dialing, or dialing from another
room in your home with less background noise.
• If the other telephones in your home are having the same problem, the problem is in
your wiring or telephone service. Contact your telephone service provider (charges
may apply).
My cordless handset isn’t performing normally
• Make sure the power cord from the charger base unit is securely plugged into a
working electrical outlet.
• Plug the power adapter into a different electrical outlet not controlled by a wall switch.
• Move the cordless handset and charger base closer to the answering machine. You may
have moved out of range.
• Reset the answering machine. Unplug the electrical power. Wait for 15 seconds then
plug it back in. Allow up to one minute for the cordless handset and answering machine
to reset.
• Other electronic products such as HAM radios and other DECT phones can cause
interference with your cordless telephone. Try installing your telephone as far away as
possible from these types of electronic devices.
“Out of range or no pwr at base” appears on my cordless handset
• Ensure that the cordless charger base is powered up.
• Place the cordless handset in the charging base for one minute to allow the cordless
handset and base to synchronize.
TROUBLESHOOTING