1.0

Out of 1 Ratings

Owner's of the Cobra Electronics Marine Radio COBRA MARINE gave it a score of 1.0 out of 5. Here's how the scores stacked up:
  • Reliability

    5.0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 40
 
Digital Select Calling (DSC) Setup
Digital Selective Calling (DSC) uses digital signals to increase messaging range. This
provides the most reliable message delivery per watt of output power. Digital signals
are less susceptible to distortion from noise and atmospheric conditions than analog
signals.
DSC equipped radios also interface with GPS and automate many operations for
sending and receiving mess
ages. This results in compact, accurate messages and
less
airwave congestion.
Setup procedures for all DSC features use the Setup menu. Refer to page 40 for
information on entering and exiting the Setup menu.
User MMSI Number
The nine (9) digit MMSI number, similar to a telephone number, is a unique identifier
for a vessel. DSC incorporates this number into every message that is Sent (Tx) or
Received (Rx).
Enter the MMSI number as soon as you receive your MMSI number
from
the issuing agency listed on page 9.
NOTE
The radio does not operate in the DSC mode until an official MMSI number is
entered. An error tone will sound when attempting to operate in the DSC
mode without an MMSI number.
NOTE
An MMSI number can only be entered one time. To create a new MMSI
number, the unit must be reset by the dealer.
Digital Select Calling (DSC)
Setup
39
To Enter Your MMSI Number:
1. Enter the Settings menu and scroll to
USER MMSI
with the Up/Down buttons.
2. Press the Call/Set button and the blinking cursor will
appear at the first digit under
USER MMSI ID ENTRY.
3. Use the Up/Down buttons to scroll through the number
list to that digit of your number.
4. Press the Call/Set button to select the digit and the
blinking cursor will move to the next digit of the number.
5. Repeat
steps 3 and 4 until all nine (9) digits of your
MMSI number are entered.
NOTE
Press the High/Low Power button to backspace
and erase the last selected number.
6. Check that you have entered the number correctly. The
unit will ask you to re-enter your number to confirm.
7. Press and hold the Call/Set button to return to the
Settings menu.
Operating Your Radio
User MMSI ID Entry
User MMSI
Nothing Comes Close to a Cobra
®
38
English
Digital Select Calling (DSC)
Setup
Operating Your Radio
F45D_Operation_Eng:8186-F55_Operation-Eng 11/23/10 10:49 AM Page 48