Emerson Clock Radio SmartSet Triple Display, Dual Alarm Clock Radio with Indoor and Outdoor Temperature Sensors User Manual

0

Out of 0 Ratings

Owner's of the Emerson Clock Radio SmartSet Triple Display, Dual Alarm Clock Radio with Indoor and Outdoor Temperature Sensors gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
14
Using AUX IN Jack to enjoy your iPod, MP3 or other audio source
This clock radio is equipped with AUX IN Jack to enjoy your iPod, MP3 player music or other audio
source.
1. Turn on the clock radio by pressing the RADIO ON/OFF button.
2. Connect your iPod, MP3 player or other audio source from its earphone jack to the clock radio
AUX IN jack with a cable with 2 ends 3.5mm stereo plug. (cable not included)
3. "AUX" indicator will light on the display while the AUX IN jack is plugged in, and the radio will
change to AUX function.
4. Start to play iPod, MP3 or other audio player, and set the player volume to maximum.
5. Adjust the main unit volume to your desired level.
6. Stop the main unit and your iPod, MP3 or other audio player when finished listening, and
disconnect the cable from the AUX IN jack.
NOTE:
1. Once AUX IN jack is plugged in, the alarm will default to Wake to buzzer, if the alarm function is
activated.
2. When the alarm time is reached, the music will be muted, and the Buzzer will sound. Press the
RADIO ON/OFF button twice to play the music again.
TEMPERATURE OPERATION
Set-up The Wireless Thermo Sensor Transmitter:
Slide open battery door. Install two “AAA” size batteries (not included), matching the polarity (+/-) in
the battery compartment.
Outdoor Temperature Display
Note:
If the battery power drops below a certain level, the
low battery symbol will flash on the
outdoor temperature display. The batteries should be changed.
When replacing the batteries or during an interruption with the transmitter, the main unit can not
display the correct temperature, please refer to the section “ TO SYNCHRONIZE OUTDOOR
TEMPERATURE” procedure, step 4 - 6.
To Synchronize Outdoor Temperature:
1. Before the main unit receives the temperature data from the Wireless Thermo Sensor. You
have to complete the code synchronizing communication between the wireless Thermo Sensor
and main unit.
2. Insert the plug of main unit into the AC outlet, the main unit will show the indoor temperature at
once on the indoor temperature display.
3. The outdoor temperature display will appear “F - -” or “C - -”. (Fahrenheit
or Centrigade).
4. Use a pointed non-metallic object, such as pencil tip to press the
“SYNC” button which is located at the bottom of the main unit to
initiate the wireless Thermo Sensor code synchronization.

   Find Your Products By Category