0

Out of 0 Ratings

Owner's of the ACR Electronics Security Camera Remote Controlled Searchlight gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 23
 
Y1-03-0138V 13
To deactivate the XRCiZ feature, press and hold the Point Pad™
ON/OFF button for greater than 5 seconds. The Red LED on the
URC-102 Point Pad™ indicates that the XRCiZ™ feature is disabled.
NOTE: LED feedback is not available when using RCL-100 or URC-
101 Point Pads™.
NOTE: The Searchlight should not be covered while the XRCiZ
feature is enabled.
The URC-102 Master Controller provides optimum voltage to ensure
the brightest searchlight performance and long bulb life. Also to
extend lamp life, the Master Controller has a timed lamp power up
feature. The searchlight lamps reach full intensity within 2 seconds.
The URC-102 Master Controller has a searchlight motor timeout
feature. If a Point Pad™ rotation switch (right or left) is continuously
engaged for more than 50 seconds, the Master Controller will
interrupt the operation until the Point Pad™ switch is disengaged.
This feature will save the searchlight motor from burnout due to
accidental activation. The elevation motor has similar features which
will timeout in approximately 20 seconds.