Using a Wireless Transmitter
1. Connect the transmitter to the car, the power indicator will be lit. Connect
the transmitter to the audio source.
2. Select the proper frequency for transmission by pressing “” “ ”.
The range of available FM frequency is: 87.5108MHz.
The LCD shows the current FM Frequency.
Each successive press of “ ” will decrease the frequency by 0.1MHz.
Each successive press of “ ” will increase the frequency by 0.1MHz.
The maximum transmission distance can be up to 4 meters.
The transmission distance differs depending on the sensitivity of the
receiver you use .
3. Turn the frequency of your FM radio receiver to the same frequency as your
4. Adjust the volume of your audio source to get good quality sound.
5. To turn the transmitter OFF, unplug the DC Car Kit.
The range of FM Frequency is: 87.5108MHz.
Important Notice: Before returning your item for service, please read the
instruction manual carefully and check our website www.cobyusa.com for
If you are still experiencing difficulty, please contact Customer Service.
COBY ELECTRONICS CORP. ("COBY") warrants this product to the original
purchaser to be free from defects in material or workmanship under normal use
for 90 DAYS from the date of original purchase. COBY agrees at our option
under this warranty, to repair or replace any parts that become defective in
normal use, free of charge to the original purchaser. This warranty does not
cover any product, which has been subjected to neglect, unreasonable use,
accident, and violation of operating instructions, damages due to material
erosion as a result of climatic conditions, acts of God, or any product that has
been repaired or modified by an unauthorized service agent. This warranty
does not cover Products sold AS IS or sold through non-traditional retail
markets (e.g. online auctions, garage sales, flea markets). This warranty does
not extend to cost incurred for installation, removal or reinstallation of the
product, or damages to tapes, discs, speakers, accessories or electrical systems.
This warranty does not cover improper use or installation of 12-volt
To obtain factory service, return this unit freight-prepaid to our Customer
Service Department. Please retain all packagings and material to prevent
damage in transit.
The unit will not be accepted for service if there are scratches or damages to the
unit as the result of handling. The unit(s) must be packaged in such a way as
to reasonably protect it from possible shipping damage. A copy of the sales
receipt, a detailed description of the problem and all parts or accessories
must be included.
If the product is no longer under warranty, the consumer will be responsible
for all freight charges and repair/service costs. Coby Electronics 56-65 Rust
St., Maspeth NY 11378, 1-800-688-2629, email@example.com
Please allow 2-4 weeks for return; please allow a additional 2 weeks during
the Holiday season.
COBY's liability under any legal theory for any loss or damage in any way
related to this product shall not exceed the sales price of this product. In no
event shall COBY be liable for any incidental or consequential damages
resulting from the use of this product, or inability to use this product. Repair
of replacement as provided under this warranty is the exclusive remedy of
Except to the extent prohibited by law, no express or implied warranty of
merchant ability or fitness for a particular purpose on this product shall not
be extended beyond the period of this warranty. Some states prohibit the
exclusion of limitation of incidental or consequential damages, so that the
above limitations or exclusion may not apply to you. This warranty gives
you specific rights, and you may also have other rights that may vary from
state to state.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
This equipment generates, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
Adjust or relocate the receiving antenna.
Increase the distance between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or
modifications not expressly approved by the Coby Electronic Corp. may void
the user's warranty. (Example-use only shielded interface cables when
connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device must not cause harmful interference .
2. This device must accept any interference received, including interference
that may cause undesired operation.
Warning: To prevent the risk of fire or fuse damage, do not use
the built in extra socket for a lighter or a similar use.
DC Car Kit
Built -in Extra
12 V DC Socket
CA-745: FM Wireless Transmitter
LOCATIONS OF PARTS AND FUNCTION CONTROLS
High quality FM wireless transmitter, that can be used with any home or car
WARNING: The unit must not be exposed to excessive moisture, or heat.
The changes or modifications not expressly approved by the Coby
Electronics Corp. could void the user's warranty.
DC Car Kit