Avanti Beverage Dispenser ORC2519SS User Manual

0

Out of 0 Ratings

Owner's of the Avanti Beverage Dispenser ORC2519SS gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
9
CASTER (WHEEL) INSTALLATION
Your Beverage Cooler is designed to either be free standing in a fixed position or moveable using
the casters (included). Follow the instructions below to correctly install the casters.
WARNING
This unit is very heavy and this
process should not be done by one
person alone. To avoid injury to
yourself and/or damage to the unit
we recommend that you proceed
according to the following steps
using 2 or more persons.
WARNING
To avoid damage to the unit during
installation, be sure that the area you
are going to be working in is:
• Clean
• Soft stable surface for working
• Flat and level
STEP 1
Lay the cabinet down on a soft stable surface to avoid:
• scratching the unit
• damage to the back panel
STEP 2
Using a Phillips head screwdriver.
Install each caster as shown using four (4) M6 screws for each caster.
Be sure that you install the two (2) casters with brakes in the front of the unit as shown.
STEP 3
Installation Complete.
Carefully stand the unit upright and allow it to stand for a minimum of 2 hours before connecting to
the electrical outlet.
HANDLE INSTALLATION
Follow the instructions below to correctly install the handle.
STEP 1
Lay the cabinet down on a soft stable surface to avoid:
• scratching the unit
• damage to the back panel
STEP 2
Using a allen wrench.
Install handle as shown using six(6) M6 screws for handle.
STEP 3
Installation Complete.
Carefully stand the unit upright and allow it to stand for a minimum of 2 hours before connecting to
the electrical outlet.

   Find Your Products By Category