Channel Plus Home Theater Server 5545 User Manual

0

Out of 0 Ratings

Owner's of the Channel Plus Home Theater Server 5545 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 6
 
If an error has occurred or an incorrect channel is
entered, the LED will flash quickly for a second and
return tothe previoussettings.
If two adjacent channels are selected, the unit will
accept the entry but will blink the LEDs of channels
that are too close. If this happens, re-program one
of thechannels tomove itaway fromthe other.
To readback modulator C channel assignment
(example: C has been programmed to channel )108
Hold button down
for 5 seconds, then release.
program
LED blinks time and pauses1
LED blinks times8
LED blinks times, pauses
(“10” is read back as 0)
10
Press button until
channel LED is on
select
C
select program
ABCD
select program
ABCD
select program
ABCD
select program
ABCD
select program
ABCD
Valid Channels:
Channel Spacing:
Error indication:
Channel number
readback:
14-64: UHF channels
65-125: CATV channels
95-99: not valid
Skip at least one number between channels.
Channels 14 and 16: OK.
Channels 14 and 15: Illegal.
A readback mode will display the current channel
assignments.
8
select program
IR
pllfrequency control
ABCD
model 5545 quad digital modulator with ir output
TM
The are digitally-tuned video modulators that convert
any baseband video and audio signal to a user-selected UHF, or Ultraband CATV.
An internal quartz crystal reference oscillator and PLL circuitry ensure drift-free
performance. The user selects the output frequency (channel) using the " "
buttonto choosewhichmodulator andthe" "button toenterthe numberof
the desired channel. Any TV connected to the output via coax can receive the
signals,whenthe TVistunedtotheproper channel.
5525 2channelmodulator withIR
5545 4channelmodulator withIR
ChannelPlus 5500 Series
select
program
Models available:
Controls and Connections:
(Model 5545 shown)
RF output
Select button chooses
the modulator.
Program button enters
the channel number
Modulator LEDs show which
modulator is selected
IR LED
Power supply
15VDC 600mA (Model 5525)
15VDC 900mA (Model 5545)
Audio inputs: Right and Left
Terminating jumpers (remove for hi-Z)
(on side of unit)
Option:
To connect the video and audio to a local monitor, use RCA type ‘Y’ adaptors and
remove the ’LOOP’ jumper for corresponding channel.
VIDEO AUDIO LAUDIO R
Video inputs
select program
IR
pll frequency control
ABCD
model 5545 quad digital modulator with ir output
TM
IR repeaters
CH C
CH D
VIDEO AUDIOL AUDIOR
CH A
CH B
VIDEO AUDIOL AUDIOR
OUTPUT
900mA
Remove jumper for Hi-Z
(See manual)
ABCD
IR REPEATERS
C
ADB
5
!
!
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
POWER
15VDC

   Find Your Products By Category