Gemini DJ Equipment TABLE TOP SYSTEM User Manual

0

Out of 0 Ratings

Owner's of the Gemini DJ Equipment TABLE TOP SYSTEM gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 22
 
CHANNEL ROTARY GAIN: The CHANNEL ROTARY GAIN allows
you to boost the signal of each individual channel depending on how
low or high its input level is.
3 BAND EQUALIZER: The 3 BAND EQUALIZER adjusts the tone of
each CHANNEL by giving you a choice 3 frequencies (BANDS) to ad-
just , from LOW, MIDRANGE (MID) and HIGH’s ,you can use the ad-
justment knobs to higher or lower the 3 separate frequencies till the
sound of the music program is appropriate for your listening environ-
ment.
CHANNEL INPUT SELECTOR: The CHANNEL INPUT SELECTOR
switches allow you to choose which input will be controlled by that
channels corresponding volume FADER.
For example on CHANNEL (1) the INPUT SELECTOR allows you to
choose between CD 1 and PHONO 1/LINE 1, and also on CHANNEL
(2) the INPUT SELECTOR SWITCH will let you choose between
PHONO 2/LINE 2 and CD 2 .
CHANNEL VOLUME FADER: After you have chosen which input you
will use with the INPUT SELECTOR the corresponding CHANNEL
FADER will allow you to adjust the volume for that particular CHAN-
NEL.
MIXER SECTION:
MICROPHONEVOLUME: Allows you to adjust the volume of the
microphone signal.All MIC inputs are controlled by the same rotary.
MASTER OUTPUT ROTARY KNOB: The MASTER OUTPUT rotary
knob adjust the volume of the MAIN MASTER output.
CUE/PGM MIX ROTARY KNOB:The CUE/PGM MIX ROTARY KNOB
adjusts the mix between the CUE signal and the main output signal in
your HEADPHONE MONITOR OUTPUT.
CUE VOLUME ROTARY KNOB: The CUE VOLUME ROTARY KNOB
adjusts your HEADPHONE MONITOR OUTPUT’S volume.
CHANNEL CUE SELECTOR: The CHANNEL CUE SELECTOR al-
lows you to choose which channel you wish to monitor in your head-
phones. To the left is CHANNEL (1),to the right is CHANNEL (2).
VU METER:The CDMP-6000 has a stereo VU METER that allows you
to monitor the decibel levels of the LEFT and RIGHT MASTER output.
VU MASTER/CUE SWITCH: This switch controls what output the VU
METER will display. In the master position the VU will display the MAS-
TER output of the CDMP-6000, and in the CUE position the left VU will
display the channel (1)’s CUE output and the right VU will display
channel (2)’s CUE output.
CROSS FADER: The CROSS FADER allows you to mix evenly from
one source to another.The CROSS FADER on the CDMP-6000 is also
removable and if the need arises can be replaced. The RG-45 (RAIL-
GLIDE™) DUAL-RAIL CROSS FADER, whichhas internal dual stain-
less steel rails that allow the slider to ride smoothly and accurately from
end to end, can be purchased from your local GEMINI dealer.
The CURVE selector lets you choose between two fader CURVE set-
tings. Positioning the switch to the left will give you a gradual CROSS-
FADE and positioning the switch to the right will give you a quick
CROSSFADE.
HEADPHONE OUTPUT: The HEADPHONE OUTPUT located at the
front of the CDMP-6000 will accept any headphone with a standard
1/4” connector and/ or adapter and will allow you to CUE your music
program before you play it.You can adjust the volume and PGM mix of
the HEADPHONE (see CONTROLS).
NOTE: WHEN USING THE CROSS FADER, LIGHTLY GLIDE THE FADER
BACK AND FORTH. PRESSING DOWN ON THE CONTROLS CAN BEND
CONTACTS AND CAUSE ALOSS OF SOUND.
›TRACK SELECTION ROTARY: TheTRACK SELECTION ROTARY allows
you to navigate through folders or tracks similarly in either USB or CD
mode. When navigating a standard CD turn the rotary to the right to ad-
vance the selection or turn the rotary to the left to decrease the selection.
Also the ROTARY knob allows you to search through music libraries on
your MP3,CD, or USB memory stick, rotate the knob until you have reached
the folder you wish to explore, folders will be identified by a (+) sign before
and after their name for example: +DANCE MUSIC+. If you have not cre-
ated a folder the song (track) files will appear with just the name of the file
which will scroll once across the display when selected then hold for eas-
ier viewing of track titles.
When you have reached the desired folder, press the ROTARY to open it or
when you have reached the desired track press the ROTARY to load it.If the
unit is in SINGLE mode the track will load and the PLAY/PAUSE button will
flash indicating that the song is ready for PLAY, or if you are in CONTINU-
OUS mode the desired track will start playing immediately.
Once a song/track is playing you may once again navigate through your
folders and tracks by simply turning the TRACK SELECTION ROTARY.
The display will go back to the last song or folder you were viewing.You
may then navigate from that point until you find your next song.The display
will show your choice for 10 SECONDS, then go back to the song informa-
tion of the song playing.
If you wish to go back and LOAD the song you chose simply PRESS THE
ROTARYTWICE, ONCE for the display to go back to the last song VIEWED
and SECOND to LOAD that song, you can also search from that point as
well. At any time when searching if you wish to go back to the ROOT level
of your drive directory or simply navigate backwards use the BACK button
as described previously.
FUNCTIONS: (CONTINUED)
27
6
31
32
33
34
35
36
30
37
38
39
28
40
41
CDMP-6000
29

   Find Your Products By Category