0

Out of 0 Ratings

Owner's of the Black & Decker Cordless Sander BDCMTO gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 28
 
7
ADAPTER (CATALOG # BDCMTOA)
An accessory adapter kit is provided with BDCMTOA. The adapter is
compatible with many manufacturers’ accessories, but if unsure, confirm
with the specific manufacturer that their accessory is compatible.
CAUTION: To avoid injury, do not use any accessory for an
application where the adaptor may fail to hold the accessory.
CAUTION: Read and follow all manufacturers’ safety warnings
for any accessories used with this tool.
CAUTION: To avoid injury, ensure adapter and accessory are
securely tightened.
CAUTION: Do not use this adaptor with Black and Decker
accessories. Attach Black and Decker accessories with the
accessory clamping lever (2) according to the instructions in this
instruction manual.
•Toattach,placeadapterplate(7)ontotheoscillatingtool
attachment with protrusions facing up as shown in Figure E.
•Placeaccessoryandtheadapterboltandwasher(8)ontopof
adapter and tighten with the hex wrench as shown in Figure F.
•Toremove,loosentheboltandwasherwiththehexwrenchand
remove the accessory and adapter.
HELPFUL HINTS
•Alwaysensuretheworkpieceisfirmlyheldorclampedtopreventmovement.Anymovementof
the material may affect the quality of the cutting or sanding finish.
•Donotstartsandingwithouthavingthesandpaperattachedtosandingplaten.
•Usecoarsegritpapertosandroughsurfaces,mediumgritforsmoothsurfacesandfinegritfor
the finishing surfaces. If necessary, first make a test run on scrap material.
•Excessiveforcewillreducetheworkingefficiencyandcausemotoroverload.Replacingthe
accessory regularly will maintain optimum working efficiency.
•Donotallowthesandpapertowearaway,itwilldamagethesandingplaten.
TROUBLESHOOTING
Problem Possible Cause Possible Solution
•Unitwillnotstart. •Attachmentisnotsecured. •Makecertaintheattachmentisfully
pushed into the Power Unit.
For assistance with your product, visit our website www.blackanddecker.com for the location
of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.
NOTE: Refer to Power Unit instruction manual for troubleshooting solutions regarding opera-
tion of the Power Unit.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized service
centers or other qualified service personnel, always using identical replacement parts.
ACCESSORIES
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
Recommended accessories for use with your tool are available from your local dealer or authorized
service center. If you need assistance regarding accessories, please call: 1-800-544-6986.
F
8
E
7
Protrusion