Uniden Baby Monitor Uniden Baby Monitor User Manual

0

Out of 0 Ratings

Owner's of the Uniden Baby Monitor Uniden Baby Monitor gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
10
•
When you are positioning the camera, bring the monitor along; it’s much easier to get the
camera into the right position when you have the display handy. Check the image on the
monitor before you install the camera.
•
Out of range
displays when the camera is out of range, turned off, or unsuccessfully paired to the
monitor. It also displays when the monitor is out of range.
You can install additional cameras (maximum of 4 cameras). When adding cameras that
were not included in the original box, you will need to pair the cameras with the monitor.
Refer to page 38.
Wall Mount
The UBR243 camera mounting clip has two slots that fit over screws to mount the unit on the wall.
1. Mark the position of the screw holes on the wall.
2. Drill holes and insert the anchors and screws provided.
Be sure to leave room for the mounting clip to fit over the
screw heads.
3. Place the mounting clip over the installed screws and push it
downwards, locking it into place.
4. Adjust the camera as needed.
Suction Mount
1. Insert the suction base into the mounting clip as shown.
2. Firmly press the camera with the suction base attached onto glass or
metallic surfaces.
3. Adjust the camera as needed.
WALL

   Find Your Products By Category