ADTRAN Switch NETVANTA 1200 POE User Manual

0

Out of 0 Ratings

Owner's of the ADTRAN Switch NETVANTA 1200 POE gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 76
 
NetVanta 1000/1000R Series Hardware Installation Guide Physical Descriptions
61200500L1-34N Copyright © 2008 ADTRAN, Inc. 19
NetVanta 1224ST Front Panel Features
10/100BaseT Ethernet Interfaces
The NetVanta 1224STs contain 24 10/100BaseT Ethernet interfaces (RJ-45). These interfaces are
consecutively numbered 1 through 24, from left to right, with the numbers screened directly above
each port. Status LEDs for each of these interfaces are located directly over these numbers.
The NetVanta 1224ST PoE also has green and red PoE status LEDs located in the upper left and upper
right corners (respectively) of each Ethernet connector.
Gigabit Ethernet Interfaces/SFP Slots
The NetVanta 1224STs also contain two Gigabit Ethernet interfaces that provide two fixed RJ-45
connectors and two standard SFP slots for fiber connectivity. (Use either the RJ-45 connectors or the
SFP slots. The fiber slots have precedence.) These interfaces are labeled
G1 and G2, and their status
LEDs (also labeled
G1 and G2) are located to the left of RJ-45 port 1, above the STAT LED.
Status LED
The STAT LED, which indicates the unit’s status, is located to the lower left of RJ-45 port 1.
Figure 4. NetVanta 1224ST Front Panel Layout
Figure 5. NetVanta 1224ST PoE Front Panel Layout
NetVanta 1224ST Rear Panel Design
The NetVanta 1224ST and NetVanta 1224ST PoE rear panel is shown below. Refer to Appendix A on page 67
for pinouts.
Figure 6. NetVanta 1224ST and NetVanta 1224ST PoE Rear Panel Layout

   Find Your Products By Category