ADTRAN Switch NETVANTA 1200 POE User Manual

0

Out of 0 Ratings

Owner's of the ADTRAN Switch NETVANTA 1200 POE gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 76
 
NetVanta 1000/1000R Series Hardware Installation Guide Unit Installation
61200500L1-34N Copyright © 2008 ADTRAN, Inc. 65
Antenna Installation Instructions
Figure 43. Proper Antenna Alignment
Your NetVanta is now ready to be configured and connected to the network. For more information on
configuration for a specific application, refer to the quick configuration documents provided on the AOS
Documentation CD. For details on the CLI, refer to the AOS Command Reference Guide (also included on your
CD).
Instructions for Installing the 3G NIM Antennas
Step Action
1 Remove power from the base unit.
2 Place either of the two antennas directly onto the antenna port labeled ANT1 on the rear panel.
3 Using the thumb screws only, carefully thread the antenna onto the connector until it is secure.
4 Repeat Step 2 with the second antenna, attaching it to the ANT2 (diversity) port.
5 Once both antennas are secured, the antennas can be flexed at the joint to increase reception.
6 Position antennas in a “V” shape at a 90 degree angle to each other, as shown in Figure 43.
ANT1 ANT2
3G NIM (CDMA)
WWAN
RSSI
1xRTT
EVDO
90

   Find Your Products By Category