Avanti Beverage Dispenser WDTZ000 User Manual

0

Out of 0 Ratings

Owner's of the Avanti Beverage Dispenser WDTZ000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 44
 
USE AND CARE 7
FILLING THE FILTER BOTTLE WITH TAP WATER
1. Remove lid.
2. Slowly ll the upper reservoir with cold tap water. Be careful not to dump
water too quickly into the upper chamber when the lower chamber is
empty because
it may tip and spill.
3. Allow water to pass from the upper chamber through the lters to the
lower chamber. Water will be ready to drink in several minutes.
4. Test the water using the TDS meter to conrm a “000” reading.
5. If it doesn’t read “000”, ush the water out, check all connections and
seals.
6. Pour water through.
7. Do not over ll. The rst time you ll your Filter Bottle it will take extra
water to ll the cooler reservoir. When water in the lower chamber
reaches the line marked “MAXIMUM WATER LEVEL”, do not put any
more water in the upper chamber, as it may leak. The upper chamber is
not designed to be a long term reservoir.
Safety Precautions: Do not use with water that is microbiologically unsafe
or of unknown quality without proper disinfection before or after the
system. Individuals requiring water of specic microbiological purity should
consult their physician. Unless notied otherwise, municipal water is
potable.

   Find Your Products By Category