Clarity Amplified Phone Pal User Manual

0

Out of 0 Ratings

Owner's of the Clarity Amplified Phone Pal gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
20
Battery installation and charging
Battery Use
Recharge the battery when the phone
is powered OFF automatically or when
there is a low battery indicator showing
on the LCD.
If the battery has not completely run
out of energy before charging, the mobile
will adjust and reduce the time
of charging.
The idle and talk time of the phone
specied by the factory is based on a
perfect working environment. In reality,
the working time of the battery will vary
with the network status, work environ-
ment and usage requirements.
Battery Installation
and removal
Step 1:
Remove the battery compart-
ment cover by sliding the cover towards
the bottom end of the phone.
Step 2:
Install the battery by pushing
the battery into the compartment while
ensuring that the contacts on the battery
and battery compartment are correctly
aligned and engaged.
Step 3:
Replace the battery compart-
ment cover by sliding the cover towards
the upper end of the phone. Make sure it
snaps securely into place.
Battery charging
Note: Phone Charging Options:
See page 21 for correct use of the
AC power adapter.
The phone may be
charged by connecting the AC power cord (tip)
directly into the phones charging port on the
side of the phone, or by using the charging
base connected to the AC power adapter.
Begin the battery charging process by
inserting the “plug-tip” of the AC Power
cord into the charging port (11) of the
phone. Plug the AC Power Adapter into
a 110V electrical outlet. Charging time is
approximately 2-3 hours.
The battery indication on the phone
LCD will begin to “blink.” If the phone
is powered off, the LCD will display
“charging”.
When charging is complete the battery
indicator will stop “blinking”.
Warning:
The phone should be stored in
a well-ventilated environment where the
temperature is -40˚C — +55˚C. Use only the
factory supplied charger and battery.
The warranty will be void if the factory
supplied charger is not used.
Battery Security
• Use only the factory supplied battery.
The use of non-original parts will void
the manufacturer’s warranty.
• The new battery can achieve the best
per-formance only after two or three
complete charging and use cycles.
• The battery may be charged for
hundred’s of times. However, over
time, the power will degrade and per-
formance will degrade. Install a new
battery when the idle and talk time are
apparently shortened.

   Find Your Products By Category