Clarity Amplified Phone Pal User Manual

0

Out of 0 Ratings

Owner's of the Clarity Amplified Phone Pal gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
31
Operations
International calls
Press * key
two (2) times to input “+”,
then the LCD will display
“+”
which
will allow you to make a call from any
country when the country prex num-
ber is known.
Step 1:
Input “+”.
Step 2:
Input country code
Step 3:
Input the complete phone
number
Step 4:
Press Dial key
Note:
Country codes are unchangeable,
however, you must remove the
“0”
from city codes.
[+]
+
[country code] + [complete
phone number] + [dial key]
Calls from a list
All calls you dial and receive will be saved
in the phone.
The numbers will be categorized by:
“Missed Calls”, Received Calls”,
and “Dialed Calls”.
Check all calls in the phone
call log
.
When the memory is full, old calls will
be automatically erased.
Note:
You can save a new call to the
phonebook.
Emergency calls
If the phone is within the service net-
work, whether using the GSM network,
you can make emergency calls. If you
have no roaming services in the area,
LCD will display
“Emergency Calls
Only”
. As long as you are in the net-
work, you can make Emergency Calls
even without a SIM card.
Receiving calls
When there is an incoming call, the ring
will sound or the phone will vibrate.
Signal strength and battery indication
will display on the LCD while receiv-
ing. If the contact number is saved in
the phonebook, the contact name will
display — otherwise, only the contact
number.
Click “Answer”
to answer the call, or
click “Refuse”
to reject the call.
Receive a call by pressing the option, or
by pressing the
“DIAL”
(connect) key.
To reject the call, press the
POWER
ON/OFF Key.
Note:
If the headset is inserted, you can
receive the call with the headset. If auto
answer function is
ON
, and the head-
set is inserted, the call will be
auto-
answered after 2 seconds
.
Conversation process
The conversation begins once
connected.
LCD display:
caller’s photo (if present),
number or name, call duration (if this
function is open).
Function operation
During the conversation, enter the talk-
ing options, press
POWER ON/OFF
key to end the call; or use the numeric
dial key. If you make a new call, the cur-
rent call will remain.

   Find Your Products By Category