Cobra Electronics Marine Radio MRHH350FLT User Manual

0

Out of 0 Ratings

Owner's of the Cobra Electronics Marine Radio MRHH350FLT gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 34
 
21
Nothing Comes Close to a Cobra
®
MEMSAMEATIS VOX LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Roger Beep Mode
MEMSAMEATIS VOX LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Call Tone Select
VHF Marine Radio Protocols
Operating Your Radio
20
English
Setup Mode Programming
Call Tone Select
This setting will also allow you to transmit a unique
Call Tone alert to identify your radio when you transmit
messages. You can select from one of 10 different
Call Tone signals.
To Set Call Tone:
1. From the previous press of the Call/Enter/Setup
button, the matrix will display CALL TONE SELECT
and the display will flash the current Call Tone
number (01 through 10).
2. Press the Channel Up/Down button to select a
different Call Tone. An example of each call tone will
sound for 1.5 seconds.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
NOTE
Call Tones are not usually used for Marine VHF
communications. We allow you to turn it On for your
unique communication needs. It is only compatible
with other Cobra VHF radios.
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone
when you release the Talk button. This alerts your listener
that you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1. Display will show ROG icon flashing and the matrix
will display ROGER BEEP ON or OFF.
2. Press Channel Up/Down button to select ON or OFF.
ROG will be displayed when On.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a
button is pressed or you change a setting.
To Set Key Tone On or Off:
1.
Display will show Key Tone icon flashing and matrix will
display KEY TONE ON or OFF.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save entry.
VHF Marine Radio Protocols
Operating Your Radio
Setup Mode Programming
Programming these features will allow your radio to listen to
all NOAA Hazard Alert radio channels.
Start from WX Alert Standby mode to begin WX Alert Setup
programming. Press and hold the Call/Enter/Setup button for
two (2) seconds to enter the programming mode.
To Set WX Alert On or Off:
1. WX Alert mode is the first mode that begins
WX Alert Setup programming. From the WX Standby
mode, press and hold the Call/Enter/Setup button to enter
the Weather mode programming.
2. Display will show WX Alert icon and flashing matrix will
display WX ALERT ON or OFF.
3. Press Channel Up/Down button to select ON or OFF.
4. Press Call/Enter/Setup button to save this entry and move
to the next setup programming mode.
Weather (WX) Mode Programming
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
WX Alert On/Off
MEMSAMEATIS VOX LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Key Tone Mode
MEMSAMEATIS VOX LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Weather Alert Standby
350_VHF_Body_v8_MRHH330_ENG_Body 3/26/13 11:45 AM Page 20

   Find Your Products By Category