0

Out of 0 Ratings

Owner's of the Furuno Flat Panel Television MU-170C gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 65
 
16
4.3 Choosing Source for Main Picture
Choose the signal to display on the entire screen as follows:
1. Press the DISP key to show the DISP selection window.
This window disappears if there is no operation for five seconds.
DISP selection window
2. Press the or key to select a signal.
You can also select the signal by pressing the DISP key continuously.
RGB1-2: The signal from the chosen RGB port is displayed.
DVI: The signal from the DVI port is displayed.
VIDEO1-3: The external video from the chosen VIDEO port is displayed on the
entire screen.
3. Press the or key to close the window.
The window disappears if there is no operation within five seconds.
Note: The name of the selected signal appears at the right top corner for five seconds after
the DISP selection window is erased.
RGB1
RGB2
DVI
VIDEO1
VIDEO2
VIDEO3