Furuno Flat Panel Television MU-170C User Manual

0

Out of 0 Ratings

Owner's of the Furuno Flat Panel Television MU-170C gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 65
 
19
Fuse replacement
The fuse in the fuse holder protects the equipment from internal fault. If the fuse blows, find
the cause before replacing it. If the fuse blows again after replacement, request service.
Ship’s power source Rating of fuse
12 VDC 10 A
24 VDC 5 A
Battery replacement
The remote controller has two AA
batteries. If the distance from which the
remote controller can be operated has
decreased, change the batteries.
Note: Use the two AA batteries. Replace
all batteries together. Do not mix
old and new batteries.
LCD replacement
The life of the LCD is about 40,000 hours. When the brilliance cannot be raised sufficiently,
replace the LCD.
5.2 Troubleshooting
The table below provides troubleshooting procedures to use when no picture appears. If
you cannot restore the picture, do not attempt to check inside the equipment – there are no
user serviceable parts inside. Refer any work to a qualified technician.
Troubleshooting table
Reason for no picture Remedy
Ship’s battery voltage too high. Check battery voltage.
Fuse has blown. Replace fuse.
Cable between MU-170C and external
equipment has loosened.
Refasten cable. You can
confirm which signals are
currently input in the
SYSTEM menu (see the
figure on the next page).
Power cable has loosened from the
terminal board.
Refasten cable.
WARNING
Use the proper fuse.
Use of a wrong fuse can cause fire or
damage to the equipment.
WARNING
Ensure battery polarity is correct.
Wrong polarity may cause the batteries
to explode.
Dispose of used batteries as industrial
waste. Follow the appropriate regulations
for the disposal of industrial waste.

   Find Your Products By Category