Furuno TV Converter Box NMEA Data Converter User Manual

0

Out of 0 Ratings

Owner's of the Furuno TV Converter Box NMEA Data Converter gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 13
 
3
Installation
Mounting Considerations
• Locate the data converter well away from areas subject to water splash and
rain.
• Keep the data converter out of direct sunlight because of heat that can build
up inside the cabinet.
Mounting
Fix the data converter to the mounting location with two self tapping screws
(3x20), referring to the outline drawing in this manual.
Wiring
Connection to Furuno CAN bus device
Connect the Furuno CAN bus cable to the Furuno CAN bus device. See
“Furuno CAN bus Network Design” (TIE-00170-x) for details about CAN bus
network.
Connection to NMEA0183 device
Connect the NMEA0183 signal cores to NMEA0183 device, referring to the
interconnection diagram as below.
Note:
NMEA0183 cable terminal is not waterproof. Therefore, install the
equipment away from areas subject to water splash and rain.
PORT1
PORT2
GND
TD_A
TD_B
RD-C
RD-H
SD
RD
SG
Drain
PC, etc.*
2
(RS-232C)
ORG
PPL
BLK
YEL or PNK*
1
GRN or PNK/BLK*
1
BLU or L-BLU/GRN*
1
WHT or L-BLU/YEL*
1
RED
BRN
GRY
Drain
RD-H
RD-C
TD-B
TD-A
NMEA Data
Converter
IF-NMEA2K2
Ship’s ground
RD
SD
GND
NMEA0183 cable
PORT1 (ORG), PORT2 (PPL), GND (BLK)
signal cores of the NMEA0183 cable are
short-circuited. (default)
NMEA0183 device*
2
*
2
: NMEA0183 cable can not be connected to NMEA0183 device and PC, etc. (RS-232C)
at the same time.
*
1
: The color of signal cores depend on the shipment time.

   Find Your Products By Category