Avanti Beverage Dispenser WDTZ000 User Manual

0

Out of 0 Ratings

Owner's of the Avanti Beverage Dispenser WDTZ000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 44
 
10 USE AND CARE
Operating the TDS Meter
ALWAYS CHANGE FILTER
CARTRIDGE WHEN TDS METER
READS “006”
1. Remove the cap from the end of
the TDS Meter.
2. Push the “ON/OFF” button. The
meter should read “000”.
3. Place the end of the meter in
one inch of water. Do not fully
submerge the TDS Meter; this may
short circuit the battery.
4. Wait a few seconds for the reading
to stabilize. You can read the
number when you remove the
meter from the water.
5. Do not use in hot water.
CHANGING THE TDS METER BATTERIES (two 1.5v button cell)
1. Use a ngernail to remove the cap at the end that says “TDS”.
2. Replace the old batteries with two new batteries (Battery Type LR44).
3. Replace the cap.
UNDERSTANDING THE TDS METER
The TDS meter helps you put a number on what your taste buds are already telling
you about what’s in your water. It measures for the things in water that can give it
a taste. The higher the reading on the water, the more substances dissolved in your
water.
For a more scientic explanation, it is showing you the total number of detectable
dissolved solids in water. With the push of a button, the electrodes in the bottom
of the tester measure the amount of ions in the water and convert that amount
to a number that displays on the screen. The number represents the amounts of
detectable dissolved solids in parts per million that exist in your water sample.
The meter is primarily used to indicate ZeroWater
®
lter replacement at 006. It may
also be used as a simple method to compare water quality by displaying the Total of
the Dissolved Solids (TDS) in parts per million only. The meter does not specify what
substances comprise the Total. The meter should not be used to assess the safety
or purity of water, which should only be undertaken by a qualied laboratory.
ON/OFF
BATTERY
COMPART-
MENT
ON/OFF
MAXIMUM
IMMERSION
LEVEL

   Find Your Products By Category