Bogen Pager UTI312 User Manual

0

Out of 0 Ratings

Owner's of the Bogen Pager UTI312 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 32
 
16
Code Call Zone Group & Tones
By default, the Code Call zone group is programmed to include all zones.The Code Calling feature gives the caller
the ability to trigger a series of chime tones to a zone group. By default, Code Call is disabled.There are two types
of code calling: pattern and echo.
Pattern Code Calling
Pattern code calling sounds a factory-set pattern of chime tones in response to a DTMF key selection by the caller.
There are 10 patterns available.The caller presses the # key and then a single DTMF key to select the pattern.The
unit will give a confirmation beep and then proceed with the code call. For example, if the caller wanted the code
call to have three chimes, followed by a one-second pause, and then a single chime, the caller would dial #7.The
calling phone can be hung up following the selection.The code call will not be heard on the phone.
Pattern Code Call Table
0 = CC 5 = CC_CC Key/Legend
1 = C_C 6 = CC_CCC C = Chime Tone
2 = C_CC 7 = CCC_C _ = pause
3 = C_CCC 8 = CCC_CC
4 = CC_C 9 = CCC_CCC
Echo Code Calling
Echo code calling sounds chime tones that correspond to a 2-digit entry made by the caller with each digit
representing the number of chimes.The caller presses the # key first and then any two DTMF keys. For example, if
the caller wanted three chimes followed by a 1-second pause and then followed by two more chimes, the caller
would dial #32.
Code Call Playing
By default, code calling triggers one series of chime tones (Code Call 1 Play). Code calling can be programmed to
repeat the series of chime tones once (Code Call 1 Repeat) or twice (Code Call 2 Repeat).There is a three-second
delay between series.
There is one selection permitted per access. In Station Mode the unit will drop the line after the code call is
complete. In Page Port VOX mode the caller is permitted to make another selection after the first code call is
complete. In Trunk or Page Port Contact mode, a caller may call into the unit,but the unit will not acknowledge the
call until the code call is complete.The code call is not audible in the handset.
The type of code calling, the number of times the tones are played, and the zone group are programmable. See
System Programming for more information on programming code calling.
AUX Relay Contact
The UTI312 allows the installer to program a number of different parameters to control the way in which the
UTI312 AUX relay contact activates.The UTI312 allows programming of which input events (Override,Tone Trigger,
Page, and Night Ring) it will respond to, whether it will respond to the event only (Event-Driven Mode) or to a
combination of the event and its place in the priority structure (Priority-Driven Mode), and if the contact will
respond during the event (No Delay) or after the event ends (Delay). See System Programming section for more
information on the AUX Relay Contact.
Flexible Dialing
The default dialing plan requires the caller to dial two digits for accessing zones or an * followed by 2 digits for
accessing paging zone groups.
Using Flexible Dialing, the dialing digit length and the access codes for zones and paging zone groups can be
renumbered to suit the needs of the user.The digit length for Flexible Dialing can be set to 2,3, 4 or 5 digits.Flexible
Dialing can be enabled or disabled in programming mode.When disabled, programming is not lost, but remains in
memory. See System Programming section for more information on Flexible Dialing.
Confirmation Tone
This tone is heard by the calling party, but not over the paging speakers. It is a beep tone and can be disabled.
Pre-Announce Tone
This tone is heard at the speakers being paged and by the calling party. It is selectable as either a chime or beep
(default).The pre-announce tone can be inhibited.

   Find Your Products By Category